Wire Rope Clips — HESCO Crane Inspection | Crane Safety Training | Accident Investigation | Crane Litigation Support | Purchase Consulting Your SEO optimized title page contents

Wire Rope Clips

Apply First Clip one base width from dead end of wire rope—U-Bolt over dead end—live end rests in clip saddle. Tighten nuts evenly to recommended torque.

Apply First Clip one base width from dead end of wire rope—U-Bolt over dead end—live end rests in clip saddle. Tighten nuts evenly to recommended torque.

Apply tension and tighten nuts to recommended torque.

Apply tension and tighten nuts to recommended torque.

U-BOLT OF ALL CLIPS ON LIVE END OF ROPE

U-BOLT OF ALL CLIPS ON LIVE END OF ROPE

Apply Second Clip nearest loop as possible—U-Bolt over dead end—turn on nuts firm but DO NOT TIGHTEN. 

Apply Second Clip nearest loop as possible—U-Bolt over dead end—turn on nuts firm but DO NOT TIGHTEN.
 

Recheck nut torque frequently after rope has been in operation.

Recheck nut torque frequently after rope has been in operation.

Apply All Other Clips. Space equally between the first two. 

Apply All Other Clips. Space equally between the first two.

 

DO NOT STAGGER CLIPS

DO NOT STAGGER CLIPS